During the last firing of my new kiln, I tried some glaze combos I haven’t tried before. I fired at cone 5 with a 10 minute hold. The kiln ended up over firing so I will not be doing a hold in future firings. The glaze was applied to cone 04 bisque ware. There were some pinholes in the glaze but it was minimal, I still find the glaze combo very nice looking. It will be interesting once I try it agin with no hold or over firing to see how it comes out.
Glazes were applied in order listed.
Amaco Honey Flux entire inside and out – 3 coats.
Amaco Chun Plum on the rim – 3 coats
Amaco Textured Turquoise about an inch wide below the rim but overlapping the previous 2 glazes – 3 coats
Laguna Speckled Buff Stoneware